Glenn410
3 December 2015
I am looking to buy a used Musser M55.
I found one for sale by someone who is reselling an estate find, but he knows nothing of the history. Is there any way to decode Musser serial numbers to determine build date, tuning, etc.? In my subject search, I found a few similar questions, but no answers.
Comments
Decoding Numbers
IndianaGlen Fri, 12/04/2015 - 10:23
None of this is a guarantee but it may help. What model is it? I have heard on the A=440/442 Bar the last two digits are from the year the bars were made. it's made e.g 84-1984.
You can buy a cheap digital tuner and if the vibe is at room temperature you can test A=440 vs A=442 and you can verify on most of the other bars.
Also look at the motor. My guess if it's an estate buy, the motor will be a Bodine. The newer ones (last 5-6 years) the motor is an "Oriental Motor" brand.
Musser Serial Numbers
gmstxfour Fri, 12/04/2015 - 20:12
Hi- Glenn has given you very good information about the bar code numbers and the Bodine motors. That is probably the best way to determine the instrument's age, assuming that the bars originally went with that frame. Older M55s will say Model 55 on the low F. Newer M55s probably don't have Model 55 stamped on the low F because the same bars are now used on other models. I find the frame serial numbers to be an enigma, but one way to establish the age of the M55's frame is to look at the cover on the motor speed control. The earliest ones are black, the brushed aluminum ones with Bodine motors are probably from the 1970s-80s. I believe from the 90s onward, the speed control shows 5 subdivisions with white lettering. Also look to see if the plate says "Musser A Divsion of Ludwig Drums." These are earlier M55s. The later ones say "Musser A Divison of Conn-Selmer." Ludwig (Musser) was sold to Selmer in 1981. You can also look at the frame braces. The earliest ones are simple. The later ones have more cross pieces. Do you have a photo to show any of these details? I hope this is helpful and I would enjoy hearing more about this topic from others. Corrections and insight are always welcome.
Thank you both for the
Glenn410 Sat, 12/05/2015 - 12:05
In reply to Musser Serial Numbers by gmstxfour
Thank you both for the helpful information.
The speed control cover is white with 5 subdivisions and is printed "Musser Control Panel Pro-Vibe M-55". I have read that A/442 become standard tuning on later M55s? I am only looking at poorly lighted photos at this point, and getting further information from the seller has been slow.
you can have the bars retuned to a=440
IndianaGlen Mon, 12/07/2015 - 11:00
In reply to Thank you both for the by Glenn410
If the deal is good enough, you can get he bars tuned down to A=440. If you're west, you can ping Salazar fine tuning, mid states, Century Mallets, or east coast Fall creek. You can call those guys for an estimate. If it was my main axe, I'd have the bars looked at anyhow.
on a side note. I have been
tonymiceli Sun, 12/01/2019 - 12:11
In reply to you can have the bars retuned to a=440 by IndianaGlen
on a side note. I have been told that to a point you can also raise the pitch of bars.
any more info on this? Could I be wrong. I heard it's where you take the metal off. Certain spots will make the bar vibrate faster up and down. So I heard.
The seller of the M55
Glenn410 Tue, 12/08/2015 - 16:48
The seller of the M55 contacted me today with the serial number. It is M2326. How would that translate to the production year?
Musser M55 serial number
gmstxfour Wed, 12/09/2015 - 11:38
In reply to The seller of the M55 by Glenn410
Hi Again- The serial number M2326 sounds like the Frame serial number. The instrument date clue will more likely be on the Bar serial number, which is on the underside of the bars, probably on the lower A. I own a Pro-Vibe M55 that I purchased new in 1978. Its frame number is M2184. My bar serial number is 05 72 78, the 78 representing that the bars were made in 1978. Based on the frame serial numbers, logic would say that your instrument was made 142 instruments after mine, but I don't know that that holds true. You could ask the seller to send you the bar numbers. I hope this works out for you.
musser bars.
yenyen Tue, 11/19/2019 - 17:50
Some Musser bars are better than others. Is there any particular year the formula has changed? Older bars are heavier.Sound is richer. Any Idea? Any difference between M75 bars? and M55 Bars?
Musser bar quality
rogersvibes Thu, 11/21/2019 - 01:15
In reply to musser bars. by yenyen
I think this topic has been discussed a few times on the site, with no clear consensus on the explanation other than that the old bars have some kind of mysterious quality that is generally preferred. I have an older M75 (60s) and a newer M55 (2000s). I definitely prefer the older bars. But besides the age, the only discernible difference is that the newer bars are "brushed" and the older bars are "polished" aluminum. I'm sure someone like John Piper or Indianglen would have more detailed technical information.
another time the bars changed
tonymiceli Thu, 11/21/2019 - 12:12
In reply to musser bars. by yenyen
another time the bars changed was in the 80s when leigh stevens was a consultant for musser. he got them to tune the bars differently (better) and that changed the sound.
i have a several mussers from different times and have seen a few different bar sounds.
i also have one from around 1948 and the bars sound beautiful!!!
1980s Mussers
rogersvibes Thu, 11/21/2019 - 13:58
In reply to another time the bars changed by tonymiceli
No disrespect to Leigh, but aren't the 1980s model Mussers the ones that people report not liking the sound of the bars, at least in comparison to the older ones?
Yes and then he came on board
tonymiceli Mon, 11/25/2019 - 12:56
In reply to 1980s Mussers by rogersvibes
Yes and then he came on board. I think the later mussels are fixed as i remember. I think that’s why he was hired.
Yes and then he came on board
tonymiceli Mon, 11/25/2019 - 12:57
In reply to 1980s Mussers by rogersvibes
Yes and then he came on board. I think the later mussels are fixed as i remember. I think that’s why he was hired.
confused
superorganic Thu, 05/21/2020 - 13:11
OK, so I've read the thread and now I'm confused. I've got an M55. Label on the frame says "Musser Division of Ludwig Ind's" with a La Grange IL address. Frame has minimal bracing, just one thin diagonal brace on each side.
Motor cover is silver with black letting, five speed settings. Low F has the "Musser 55" stamp. Bars have a brushed finish rather than polished. Date stamp on the middle A says 10 72 92, and there's an "N" stamped to the left of the A and a "P" stamped to the right of the A. Tuning is 440. Is this a mongrel - frame and bars from different times? Thanks in advance!
m45
Cal Haines Sat, 12/09/2023 - 10:46
Just bought a used M45. Does any one know about this instrument? serial number is 3463. It is a Hampton model. Ludwig does not list a manual for the model . They have M44 and M46 but not M45. I need to refurbish this instrument. Any help would be appreciated.
thank you
cal
It's like a century right?…
tonymiceli Sun, 12/10/2023 - 15:10
It's like a century right? Does it have a motor? 1 speed or multi speed?
I know a guy who does this. email me tony@tonymiceli.com. There are probably more, but this guy is my buddy and a longtime vibeworkshop guy. And he does an amazing job. AND I think he retired from his day gig recently.
It is a century.
khvibes Wed, 01/03/2024 - 07:19
In reply to It's like a century right?… by tonymiceli
Well this is unrelated, but according to wikipedia it's been a century since Leedy started marketing the instrument as the vibraphone.
thanks for that! so our…
tonymiceli Fri, 01/05/2024 - 11:57
In reply to It is a century. by khvibes
thanks for that! so our instrument is about 100 years old.
Deagan Serial Numbers
Holger Kaufmann Sun, 01/14/2024 - 05:51
Does anyone know the system of Deagan Serial Numbers? I have some bars from a Deagan Xylorimba 730 with the serial Number 23870. Does that mean that it was made in 1923? My Deagan Commander 592 Vibraharp has the serial number 19743. Might it be the third instrument made in 1974? For both instruments the years of production could fit actually. Thanks for help!
The expert to ask is Andres Bautista - Century Mallets, Chicago
Randy_Sutin Sun, 01/14/2024 - 10:54
In reply to Deagan Serial Numbers by Holger Kaufmann
There is nobody who knows more about Deagan instruments than Andy. He can tell you exactly what you have and what the numbers mean.
https://centurymallet.com/services/
Deagan Serial Numbers
Holger Kaufmann Sun, 01/14/2024 - 17:33
In reply to The expert to ask is Andres Bautista - Century Mallets, Chicago by Randy_Sutin
Thank You very much! I' ll ask him!
Era of Musser bars with no serial number/date on bottom of bars
MoonVibes Sun, 10/27/2024 - 18:58
I am trying to find out the era of my Musser M75, all the above seemed helpful except my vibes don't seem to fit any of these clues. There are no serial numbers under the bars just 'Musser M75 made in USA' on the top low F. The body has the serial number (I think it's a Q) Q 1110 (Musser division of Ludwig). Gold bars, Black Oriental motor with silver plate on its top and gold plate on its front with an on/off click switch to the right of a sweeping speed control on front of instrument. Any ideas out there?
we have never (i think ) had…
tonymiceli Tue, 11/05/2024 - 11:26
we have never (i think ) had success with serial numbers here.
you did mention something, and that's speed control. there earliest instruments did not have speed control. i have an m75 with no speed control, just one speed.
maybe that doesn't help at all, but i just thought I'd mention it.
Yes. Early vibes were single speed
Randy_Sutin Tue, 11/05/2024 - 12:32
In reply to we have never (i think ) had… by tonymiceli
The variable speed motor was a late concept. The first one I am aware of was a modification to the Desgan system that applied friction to the pulleys to slow it down. It was very hard to control and had the nasty side effect of causing the motors to burn out prematurely.
My 1949 M75 is like yours; it originally had a single speed motor. It was upgraded to a new motor when I purchased it from Fall Creek Marimbas… they had taken it in with some issues and brought it back to life.